Descrizione del prodotto
SINAMICS G120P Power Module PM330 non filtrato senza chopper di frenatura integrato 3AC380 ... 480V+10/-10% 47 ... 63Hz potenza senza sovraccarico: 160kW a 150% 60 s, 100% 240s potenza sovraccarico ridotto: 200kW a 110% 60s, 100% 240S temperatura ambiente 0 ... +40 °C 1447x 452x 328 (AxLaxP), FSGX grado di protezione IP20 senza Control Unit e BOP pannello di comando approvato per CU230P-2 dalla versione firmware V4.6 Power Module SINAMICS PM330 Power Module with degree of protection IP20 for industrial applications in the process industries for the SINAMICS G120P frequency converter. The PM330 Power Modules, especially developed for simple applications, such as driving pumps, fans, and compressors with a load characteristic that increases depending on the speed. They will meet the stringent requirements for energy efficiency with optimum energy utilization. This is achieved by the very high efficiency, which is verifiable according to EN 50598, various energy-saving functions, and the automatic pulse frequency adaptation. The PM330 Power Modules are equipped with an RFI suppression filter in accordance with the limits defined in Category C3 as standard and meet the limits for use in the first environment (Cat. C2) according to EN 61800-3 with the use of an external line filter. If necessary, dv/dt filters for different powers or a Braking Module can be connected. A DC link connection is also available as standard. All available system components are precisely matched to the PM330. In this way, customized cabinet solutions can be implemented reliably and safely and space can be saved with compact cabinet building. The PM330 pays off with its ruggedness and is suitable for corrosive environments thanks to its noxious-gas-resistant components and coatings. All terminals and internal modules are easily accessible. Variable motor cable lengths are simple to implement via output reactors. In this case, too, series connection is permissible. The PM330 Power Modules are suitable for connection to grounded TN/TT and ungrounded IT systems, but not for 690-V power systems with grounded phases. The CU230P-2 Control Unit intended for the PM330 does not have special Safety Integrated functions, but safety functions can be implemented with external cabinets. The Power Module PM330 (degree of protection IP20) powers motors in a power range of 160 kW to 630 kW. They are available for frame sizes GX to JX in a three-phase voltage range of 380 V to 690 V. To select a suitable Power Module, the following currents should be used for applications. With low overload (LO), the base-load current IL and, with high overload (HO), the base-load current IH. SINAMICS – the integrated drive family for every field of application.Dati tecnici
EAN/GTIN/Barcode | 4042948666586 |
larghezza | 452 mm |
altezza | 1447 mm |
profondità | 327 mm |
tensione di rete da: | 380 V |
tensione di rete a: | 480 V |
max. frequenza d’uscita | 100 Hz |
corrente di uscita nominale I2N | 370 A |
max. potenza erogata con carico quadrato a tensione d’uscita nominale | 200 kW |
max. potenza erogata con carico lineare a tensione d’uscita nominale | 160 kW |
tolleranza di frequenza di rete simmetrica relativa | 5 % |
tolleranza di tensione di rete simmetrica relativa | 10 % |
Selectra - codice marchio | SIEM |
Codice categoria | 5145 |
Prodotti simili
Di questo marchio