Descrizione del prodotto
KNX Binary input REG-K/4x230. For connecting four conventional devices with AC 230 V outputs to the KNX. With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. KNX software functions:. Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time. Input voltage: AC 230 V, 50-60Hz. Inputs: 4. Input current: AC 12 mA. 0 signal: Dati tecnici
| EAN/GTIN/Barcode | 3606485100012 |
| tipo di montaggio | AMD |
| grado di protezione (IP) | IP20 |
| larghezza in unità di suddivisione | 2.5 |
| numero di ingressi | 4 |
| tensione d’ingresso da: | 0 V |
| tensione d’ingresso a: | 230 V |
| tipo di tensione d’ingresso | AC |
| con indicatore a LED | Si |
| sistema bus EIB/KNX | Si |
| sistema bus radio KNX | No |
| sistema bus radio | No |
| sistema bus LON | No |
| sistema bus Powernet | No |
| altri sistemi bus | senza |
| accoppiamento bus incluso | Si |
| radio bidirezionale | No |
| modulo bus rimovibile | No |
| comandare LED | No |
| tensione di interrogazione esterna necessaria | No |
| Selectra - codice marchio | MERT |
| Codice categoria | 2511 |
Prodotti simili
Di questo marchio
